Status iPhone stuck on logo, not being able to boot can cause a lot of trouble for users. This usually happens due to some software or hardware problem. Below is some useful information to help you resolve this problem quickly and effectively.
| Join the channel Telegram belong to AnonyViet 👉 Link 👈 |
Common causes of logo hanging
Update iOS
Upgrading to the latest version of iOS is an effective way to ensure that your iPhone is always equipped with advanced features and optimal security. However, this upgrade process can sometimes lead to technical problems and cause the iPhone to not boot up, only displaying the logo. This often happens when new iOS versions are installed on older iPhone models.
One of the main reasons for this problem is incompatibility between the device's hardware and software. Update to new iOS version on one Iphone Old can lead to hardware conflicts, causing the computer to not boot. For example, a new version of iOS may support NFC or have different screen format requirements, but if your iPhone doesn't support these features, the upgrade may fail and cause errors.
Jailbreak
Jailbreak is the act of unlocking the iOS operating system so you can install unofficial apps from outside the Apple Store. However, this process risks damaging the system and causing the logo to hang on your iPhone. This often occurs when you install apps that are not verified or are not compatible with the current iOS version.
Performing a jailbreak can affect the stability and security of the iOS operating system, making the iPhone vulnerable to malware attacks. If you don't carefully choose the apps and tweaks to install, you may accidentally cause system problems and cause your iPhone to not boot.
Hardware failure
Hardware problems such as screen damage or battery failure can be the reason why the iPhone is stuck on the logo. If your iPhone ever experiences a strong impact from a drop or collision, or is exposed to water, these can damage the hardware and lead to non-functioning.
Besides, other hardware problems such as errors in the boot software, problems with the processor chip, or memory errors can also cause system problems and cause the iPhone to freeze.
How to fix iPhone stuck logo error
Restart your iPhone
To solve the problem of stuck logo on iPhone, restarting the device is often effective. Simply hold down the power button and home button at the same time for 10 seconds until the screen turns off and the Apple logo appears. Next, let go of the power button but continue holding the home button until the device comes back to life.
Use system recovery software
In case the mentioned methods do not yield the desired results, applying system recovery applications such as iTunes or dr.fone can help you. These applications have the ability to reset the iOS operating system and restore the device's original state. However, this process has the risk of data loss, so backing up information is a step that cannot be skipped before using recovery software.
Use DFU mode
DFU mode, short for Device Firmware Upgrade, is a special firmware upgrade method for iPhone that allows you to reboot the device from the bootloader. When your iPhone cannot boot due to stuck logo, DFU mode can be the solution.
To enter DFU mode, connect your iPhone to your computer and launch iTunes, then hold down both the power and home buttons simultaneously for 10 seconds, then release the power button but hold the home button for another 10 seconds. iTunes will detect that the iPhone is in DFU mode and from there you can proceed to restore the device's system.
Epilogue
To resolve the problem iPhone stuck on logo, a reboot or factory reset may help. If the problem is still not resolved, you can contact the Apple warranty center for support. In case your iPhone is under warranty, you can get it replaced or repaired for free. Good luck!
