RTL8188EUS SCRIPT is a tool to help you install USB Wifi Driver for 2 lines TP-Link WN722N, TP-Link WN725N on Kali Linux or Parrot OS that can be installed on VMWare. This is a pretty useful tool to help you install wifi drivers automatically very quickly and in less time. Listen to this, everyone who hacks wifi in Vietnam as well as abroad knows this already, right?
| Join the channel Telegram of the AnonyViet 👉 Link 👈 |
The RTL8188EUS SCRIPT tool only supports Kali Linux and Parrot OS operating systems. These are the two operating systems that almost 69% of the hackers use. So, those of you who want to choose a suitable operator to learn hacking can read this posts here you go. Also the script is written in the language Python combined with language Shell . Not only that, this driver is also supported for the adapter TP-Link WN722N, TP-Link WN725N… To install the most convenient driver through this script, let’s learn about the requirements of the script.
Requirements when installing RTL8188EUS SCRIPT Driver TPLink WN722N
- System Requirements
updateandupgradefull will save more time - Requirement to have
python3andpip3in a Kali Linux or Parrot OS . machine
Thus, those are the 2 minimum requirements of the script. And now to the installation and use of the script!
Installation and User Manual RTL8188EUS SCRIPT
Installing Wifi Driver for TPLink 722N on Kali linux is quite simple, please enter the following commands. In the instructions below, I tested on Virtual Box and was 100% successful when catching waves and connecting Wifi around.
git clone https://github.com/sonvan1811/rtl8188eus.git
cd rtl8188eus
python3 rtl8188eus.py
Here, there will be 2 options for you: download the driver on the Kali Linux machine and download the driver on the Parrot OS machine, I’m using the Parrot OS operating system, so I choose number 2.
While the script installed the necessary packages. At this point, please enter the permission password sudo yours to continue the installation
When the installation is complete, all you have to do is enter the command sudo reboot or reboot to restart the machine
The booting process is done, now please plug the wifi usb into the machine and open it Device -> USB on your virtual machine then click on the wifi usb device. Here I am using TP-Link WN722N V2/V3 wifi usb usb. If you want to buy this usb, please drop by here
When it appears as shown in the picture, you have successfully installed it ^^. Now you can hack wifi. And if you don’t know how to hack wifi, you can read it posts This is from Anonyviet
Also you can see the whole script installation process and how to enable monitor mode. here
So I have finished the instructions, if you encounter any errors while installing, please comment under the Comments section or inbox directly for help. Bye Bye !, have a nice day and work effectively
