Hack wifi through WPS PIN
Join the channel Telegram belong to AnonyViet 👉 Link 👈 |
Internet is essential need of all of us in this life. It is not difficult to have an internet connection. With any smartphone in hand. We all easily connect to a wifi. Wifi is a wireless network connection that provides us with the internet. In this post AnonyViet will mention wifi hacking problem not turning off WPS.
What is WPS Definition?
First of all, you should understand briefly about WPS to easily visualize the method. When we connect to a wifi, there will often be a step asking for a password. If the correct password is entered, the connection will take place. Most modems today have built-in WPS features. This feature allows us to connect through a default PIN of the device.
And the most unfortunate part of this method is that the PIN can be decrypted. Are you wondering how to find out the PIN code? Currently, there are many tools that allow displaying wifi’s PIN. Most are free wifi hacking software on android such as Wifi Pagoda, Wifi test, etc. The code detection process only takes a few seconds.
However, some old WPS modems and routers have a very high possibility of wifi hacking. If you don’t mind, turn off this feature of Wifi to avoid being hacked.
How to check if your home wifi is safe enough?
Today I want to introduce everyone to the app Wifi connection of our Vietnam. I tested it on Android operating system. To see if this tool helps hackers hack wifi or not.
This is a 100% free application you can download and experience together for fun.
The application will ask us to turn on GPS to scan the network. You don’t need to worry about this. Because this is the protocol required in network scanning. The other applications I use also require the same.
After scanning, it will list out a list of scanned wifi in the area near you.
Here, the more stars, the better the security. In the picture you can see that Wifi Nam Nguyen is not very secure. It is possible that due to using old WPS, the PIN code is exposed and easily attacked.
“WiFi is supported” is a proof that there is a secure WPS but still cannot avoid the risk of being hacked.
“Wifi not supported” means that WPS has been disabled and cannot be hacked in this way.
In less than 10 seconds, the connection was successful. Which means this WPS is quite old and very easy to hack by way of PIN encryption.
Because my phone has Root (Jailbreak) so you can see the wifi password. But if you haven’t rooted your device, it’s okay because the password will be saved automatically for the next connection.
Hack Wifi via WPS by phone combined with apps Temple Wifi or Wifi Master Key then go out on the street without fear of lack of Wifi to use
How to turn off WPS to not get hacked wifi
Each modem, router will automatically turn on its own WPS, so if you do this feature already. When you change the modem, you still have to do it again.
This method can be used on a computer or a phone. As long as you can connect to the wifi you need to adjust.
You go to the host page to control the modem with a web browser. Normally the default will be 192.168.1.1
If the above address does not work, you can try the following host addresses:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
- 192.168.100.1
When you see a page asking for username and password. As shown below, you have entered the correct host page.
Different modems or routers will have different interfaces. The most beautiful and easy-to-use interface today is FPT. Normally setting up WPS it will be in the section of the Wireless section.
You just need to disable (disable). But for some modems and routers, you need to press the save button to save it.
You can use the Wifi test I mentioned above to check if it is still easy to hack. Thank you to everyone who has followed this post.
Like fanpage to update the best and earliest articles.
Good luck
Lmint.