5 ways to remove water from iPhone speakers during the rainy season

5 ways to remove water from iPhone speaker is a problem that many iPhone users are concerned about when their phone gets wet or falls into water. Water inside the speaker can reduce sound quality, cause noise, or even damage the speaker. So how to remove water from the iPhone speaker effectively and safely? Please follow the article below!

Why is water getting into the iPhone speaker a big problem?

Water entering the speaker Iphone is a quite common and annoying problem for many users, it can cause unwanted consequences such as:

• Reduces the sound quality of the speaker, making the sound shrill, distorted, soft or inaudible.
• Damage the speaker or other components in the iPhone if water penetrates deep inside.
• The iPhone’s warranty will be voided if the manufacturer detects signs of water in the device.

Consequences when water enters the iPhone speaker

If you leave water in your iPhone speaker for a long time, you may encounter problems such as:

• Speakers are moldy, creating bacteria and mold that are harmful to health.
• The speaker is rusted, causing a short circuit or fire.
• The speaker is deformed, loses sensitivity or is inoperable.

5 ways to remove water from iPhone speakers during the rainy season

To avoid the above consequences, you need to remove the water from the iPhone speaker as soon as possible. Here it is 5 ways to remove water from iPhone speaker The most effective way you can apply:

Method 1: Use Siri Shortcuts

You can apply a shortcut called “Water Eject” if you have Shortcuts installed, this shortcut works like the water lock function on Apple Watch Series 2 and above.

Shortcut Water Eject download link here.

When your iPhone gets water into the speaker due to rain, swimming, or dropping it, you just need to activate Water Eject and then the iPhone will vibrate on both the top and bottom speakers to push water out of the device.

Method 2: Use the Sonic application

If you don’t use Shortcut, you can use Sonic on the iPhone’s app store. You can download Sonic here Or go to the App Store to find and download.

Sonic works very simply, just download and select the frequency, turn on the maximum volume and press PLAY and you’re done.

Note: You should adjust it to about 50 – 250 Hz to push water out of the speaker. Do not adjust it too high or too low as it will harm the speaker.

Method 3: Use the szynalski website

This is similar to the Sonic app but you don’t need to install the app. You just need to go to the website szynalski Then select the frequency from 50 – 250Hz, turn the speaker volume up to high and press PLAY, very simple, right!

Method 4: Take advantage of rice boxes and boxes with desiccant bags

This is a traditional method. If your iPhone has a lot of water in it, not just the speaker, put it in a bucket of rice or put it in a sealed box and put it with many desiccant bags to absorb the water out of the iPhone.

Method 5: Use a vacuum cleaner

Another good way is to use a vacuum cleaner to suck water out of the iPhone speaker. The water in the iPhone speaker will be sucked out by the suction power of the vacuum cleaner. You can apply this method if your home has one. Please!

Epilogue

Those are the suggestions 5 ways to remove water from the iPhone speaker which you can test. Hopefully this article has provided you with useful information and helped you fix the problem of water in the iPhone speaker quickly and easily. Thank you for reading this article and good luck with your application!