Get Wifi Password I’m sure any of you have heard it. Get wifi password There are some commonly used methods such as using a dictionary which will try the possible pass generated by a set of dictionaries but this method is very difficult to succeed and if so it takes a long time. The second way is to use errorWPS on modems because there are only 11000 codes, this way is often used.
Join the channel Telegram of the AnonyViet 👉 Link 👈 |
With JumpStart Vietnameseize + Dumper I will show you how get wifi password with modems turned on WPS (success rate depends on the difficulty of the pin code and the wave quality, there will be wifi get password yes and some can’t get the password)
Step 1: Everyone downloads JumpStart Vietnameseize + Dumper (pass: anonyviet.com) to desktop and extract.(You need to install .Net Framework 4.0 if not already)
(What is .Net Framework? See here)
Step 2: Run the file JumpStartsetup.exe to install. Then you right click on JumpStart in the System tray bottom right corner select Close and run the file JumpStart Viet (32bit or 64bit depending on the windows you are using). Below is the interface of the program (This version is Vietnameseized by ptk911 from Vn-zoom):
Step 3: Open the Dummper file, select WPS Tab >> Select All Wifi networks and press Scan >> After scanning, select 1 Wifi and run JumpStart. Then JumpStart will automatically run and find the wifi password for you.
Step 4: When you receive a successful connection notification, go to Dumpper, select the Profile Tab and see the password of the Wifi you just got the password
A few common errors:
*. If scanning takes a long time, depending on the machine, a blue screen may occur. It’s okay, restart the machine is normal and scan again.
*. If the message No network card found (Wireless Adapter) is displayed, your wifi card may not be supported.
*. If Dumpper says it can’t find JumpStart in this path, see where JumpStart is installed and then browse for the path for it, or copy the default path below and paste it:
– Windows 7, 8 32bit: C:\Program Files\JumpStart
– Windows 7, 8 64bit: C:\Program Files (x86)\JumpStart
– Windows XP: C:\Program Files\Atheros
*. if scanning with Dumpper 50.5 or higher and encountering locked wifi, then scanning again with Dumpper 40.1 will not work, but in this case it is unlikely to get the pass.
*. If the displayed password is a sequence of numbers like Hex, then use pm WiewlessKeyView of Nirsoft, it will show the correct password. Download from the homepage: 32bit version , 64bit version
Good luck.
Attention: After receiving a number of comments from everyone, first I would like to thank everyone for their interest in the topic. Next, I have some comments as follows:
First of all the current ways to get Wifi passwords, the ability to get the password is very low. So this software is no exception. The ability to hack 1 pass is very difficult.
Second: Only when you need or the conditions do not allow it, you need to get the password and AE when getting the password, you should also use it carefully to avoid affecting the Wifi owner.