In this article, I will show you how to hack to increase your headshot rate free fire game or any other FPS game on Android. The special thing about this tutorial is, you don’t need to use any hacks. All you need to do is change your Android system to increase the headshot ratio. So you don’t have to worry about getting banned from the game anymore.

How to hack to increase the rate of headshot game free fire

Note, this is just a way to increase the rate of HeadShot, not a one-shot, good shot or not depends on your level of Free Fire. We will take advantage of Android’s built-in feature to turn on the sensitivity for the center of the gun, then it’s easier for you to hit the opponent.

First, you access the application Setting on Android phones.

Next go to the search section and enter “speed”. Then select “Pointer speed”.

Scroll down and select “Pointer speed” again.

You drag the multi-slider speed. When done, click “OK”.

Go back to Settings and select “Accessibility”.

Scroll down and select “Stop time”.

You turn the “Use the service” switch to the right and drag the “Delay before clicking” down to the smallest.

Go back to the “Accessibility” section and enable the “Large mouse pointer” option.

Next, you need to enable developer mode by going to the “About phone” section. Then scroll down and tap “Build number” 7 times.

When the words “You are already a developer” appear, it is successful.

Go to “Developer Options” in the Settings app. Then scroll down and go to the “Minimum width” section.

You adjust DPI from 500-800. I set the maximum to 800DPI.

That’s it, you’ve just hacked to increase the headshot rate in the free fire game successfully. The above operations are to increase pixel density, touch sensitivity so that you can easily shoot head shots in free fire games. Also, if you don’t want to edit that much, you can use Free Fire mod.

Refresh rate is measured in Hertz (Hz) and it determines the number of times an image appears on the screen per second. In general, the faster the image changes (or refreshes) on the screen, the better and smoother the viewing experience. On the other hand, the slower the refresh rate on the screen, the more uncomfortable the experience will be, causing lag, causing screen flickering, headaches and eye fatigue.

Although Windows 11 can automatically set the optimal refresh rate, sometimes you may need to change the refresh rate manually depending on the situation. For example, if you have a monitor that supports a high refresh rate of 144Hz or higher, which is often seen on gaming monitors. Or you notice some flickering because the monitor might be using a low refresh rate.

Whatever the reason may be, the Settings app will make it easy to adjust your device’s refresh rate. Also, now you can also turn on Dynamic Refresh Rate (DRR) on supported hardware. Dynamic Refresh Rate (DRR) is a feature available on Windows 11 and higher releases that automatically increases or decreases the refresh rate for gaming or scrolling the screen for a smoother experience while saving more battery. .

How to change the screen refresh rate on Windows 11

On Windows 11, there are two ways to control the refresh rate. You can specify a specific number or enable Dynamic Refresh Rate (DRR) if your hardware supports it.

Change refresh rate

1. Open Settings.

2. Click System.

3. Click display on the right side.

4. In the “Related settings” section, click advanced display.

5. In the “Display information” section, select the refresh rate you want.

After you complete the above steps, the system will apply the new settings and the monitor will start using the new refresh rate.

Enable Dynamic Refresh Rate (DRR)

1. Open Settings.

2. Click System.

3. Click display on the right side.

4. In the “Related settings” section, click Advanced display.

5. In the “Choose a refresh rate” setting, select the option Dynamic. (Option only available on supported hardware).

After you complete the above steps, Windows 11 will automatically increase or decrease the refresh rate to save energy.

If you change your mind, you can always undo the changes using these steps, but in step 5, choose the speed you want to use for the display.

In addition, you can also see how to connect 2 or more monitors on Windows 10 here.

You can use the RRI function in Excel to calculate the compound annual growth rate (CAGR) of an investment over a multi-year period.

Compound Annual Growth Rate in Excel

1. The RRI function below calculates the CAGR of an investment. The answer is 8%.

Note: the RRI function has three parameters (number of years = 5, start = 100, end = 147).

2. CAGR measures the growth of an investment as if it were growing at a steady rate on an annual compounding basis.

The same, similar:

Note: again, number of years or n=5, start=100, end=147, CAGR=8%.

3. Knowing this, we can easily create a CAGR formula that calculates the compound annual growth rate of an investment in Excel.

A2 = A1 * (1 + CAGR)ⁿ

end = start * (1 + CAGR)ⁿ

end/start = (1 + CAGR)ⁿ

(end/start)^1/n = (1 + CAGR)

CAGR = (end/start)^1/n – first

4. CAGR formula is formed.

In addition, you can also view many other excel articles here.