Join the channel Telegram belong to Anonyviet 👉 Link 👈

If you want to use Android operating system to play games without worrying about battery or configuration. No need for a fancy phone, just a mid-range computer that can do that for you. With Bluestack it is quite possible. This is a software that provides an emulator environment for you to run Android application programs on your personal computer. It will be no different from a modern android phone running on a computer. Freely play games, freely install software without worrying about capacity or running out of battery halfway.

But Bluestack has a disadvantage that is too heavy, requires quite high resources, causing the computer to run sluggishly, lagging and even full disk leading to a mid-way crash. But this headache has been fixed through this ultra-light root version of BlueStack.

Why is this version lightweight and what else is there?

This version has been tested and removed some unnecessary features that consume resources, but still ensure 100% ability to play games and install required applications. You can see the image below, there is the interface of this shortened version (removes limited online features, advertising and resource-intensive development functions, etc.) Which game is right?. What are you waiting for?

About the root version

This mod is made by long chivas.
This version has some improvements I will list below

• Remove ads of bluestack
• Installed some additional software
• Removed some unnecessary parts
• Optimize computer resources when using
• Speedup is fast during use
• Defrag at runtime
• And the turn of the developer’s unoptimized and unnecessary services.

This mod is very light, 4gb ram machine can play games + turn on facebook and youtube without lag or jerky and really good if you want to use Android to fight games. This is the right choice if you use .

You guys should uninstall other emulators before installing BlueStack to avoid conflicts during use. This is important, if there is a conflict, your computer will be heavily fragmented.

This version has been verified, so there is no virus, you can rest assured to use it for a long time and if you have any problems, go to the fanpage for us to help.

Link to download the full version of BlueStack Root

Download here

Like Fanpage to update the latest news

Wish you success MK-69.

Over time, your computer will slow down. Of course, outdated hardware is part of it, but for most people, the more common cause is poor operating system maintenance. So, it’s almost Tet, why don’t we clean up the computer garbage to welcome the new Tet? Here are methods to speed up Windows by deleting redundant files, junk files…

Reinstalling Windows is the first choice. Getting rid of all the junk space will make your machine run faster and smoother.

However, you don’t need to take such drastic steps. Taking a moment to clean Windows can yield similar results. Sure, your 5-year-old laptop may never be able to play the latest AAA games, but you’ll still see noticeable improvements.

1. Uninstall unused software

Let’s start with what everyone already knows. A clean computer is one that is free of old software that you no longer use. If you are not a neat person, you will be surprised at how much unnecessary software you have installed on your machine.

To see all the apps on your computer, go to Start > Settings > Apps > Apps and features. Scroll down and click Uninstall on any software you no longer need.

Gentle reminder, you need to be careful. Don’t just delete things you don’t know what they are. Please google and find out the software before removing it. Or you can also use software IObit Uninstaller to remove the software completely.

2. Run anti-virus software

Next, you should run your anti-virus software. One of the most common causes of slow computer is viruses, so that’s the best way to clean up a Windows PC.

Each anti-virus software has different options, but there is one thing that every anti-virus software must have. Full Scan or Deep Scan. The scan will take a lot longer to complete, but you can be sure that it won’t miss anything on the operating system.

You might consider using TOP anti-virus software listed by AnonyViet. Instead of focusing on viruses, its main goal is to protect users against the latest trojans, backdoors, adware and spyware.

3. Disk Clean-Up

Disk Cleanup has been a part of the Windows operating system for many years and it is still effective at cleaning unnecessary files and improving system performance.

To run Disk Cleanup, enter the application name in the Start Menu or go to Control Panel > Administrative Tools > Disk Clean-up.

Before scanning, click Clean up system files. It allows the application to run a more thorough scan by checking the old Windows Update files and log files.

In general, you can delete all the files that the program finds. Tick ​​the checkbox next to each result and click OK. Note, however, that when you choose to delete the Windows installation file(s) first using the Clean up system filesyou will no longer be able to roll back to an earlier version of Windows.

4. Defragment your hard drive

Windows 10 runs defragmentation of the drive when necessary. However, since we’re doing a thorough cleaning of the computer, it’s not recommended that you run it manually.

You can find tools Defragment and Optimize Drives by searching on the Start Menu or going to Control Panel > Administrative Tools.

To use the app, highlight your main hard drive and click Optimize on the right side of the window.

5. Delete Old Driver

Windows still retains the old drivers. The purpose behind keeping is just in case: you’ll never have a problem if a new driver doesn’t work as expected. The difference, however, is that your machine may be filled with drivers from devices you stopped using years ago.

There are two easiest ways to remove old drivers from your computer: cmd or environment variables. For more information about these two ways, you can read this article to know how to remove old drivers from Windows. Or the simplest way is to download the software completely IObit Advanced SystemCare about make it fast.

6. Clean Startup

Any seasoned Windows user knows that the operating system lags behind macOS, Chrome OS, and Linux when it comes to slow boot times.

Usually, it is caused by the number of programs that Windows tries to launch at startup. Most of them are not necessary.

To clear your startup list, press Ctrl + Alt + Delete and choose Task Manager. On the new window, click Startup.

You can now look at all the Windows applications that try to run at startup. To disable an app, select it and click Disable.

7. Clean up the AppData folder

When you uninstall an app, you’ll often find remnants of that app scattered around your machine. One of the most common locations is the AppData folder.

By default, this folder will be hidden. You can find it at C:\Users\[Username]\AppData or by typing %AppData% into the Windows search box.

In the main directory, there are three subfolders: Local, LocalLow and Roaming. Make sure you check all three of these folders for any traces of old software. Again, don’t delete anything unless you’re sure it’s safe.

The best way to help you remove software completely is to use IObit Uninstaller.

8. Delete Old Program Files

Another place you often find remnants of old applications is in the Program Files folder.

On most machines, there are two Program Files folders: C:\Program Files and C:\Program Files (x86).

As with the AppData folder, check the contents of each folder carefully and delete any files and folders that are no longer in use.

9. Clean up the Registry

You’ve probably heard some horror stories about the Registry or you’ve experienced the same feeling, where just one wrong click is enough to crash your system. No kidding.

It is essential to keep your registry tidy. Think of it like a library: the larger the library, the longer it will take you to find what you’re looking for. Similarly, the more junk in your registry, the longer it takes Windows to identify the entries it needs.

Let’s solve this problem together. Search regedit and press Enter. Then go to Computer\HKEY_LOCAL_MACHINE\SOFTWARE and Computer\HKEY_CURRENT_USER\Software. In each folder, slowly go through the list and delete the entries of software you no longer use.

Warning: Deleting the wrong registry entry can have serious consequences for your system. Make sure you have made a complete backup of your registry data before proceeding.

Advanced SystemCare software is recommended.

10. Clear all cache

Windows 10 is full of cache. Without digging into technical jargon, a cache is a non-permanent file that Windows may need again in the future.

But what if Windows doesn’t need it anymore? You will have a dump lying around every corner of your system.

Windows 10 has quite different types of cache and each type has a different way to delete it, so doing it all will take a lot of time. And this is where Advanced SystemCare comes into play :))

How to trash your computer?

I have introduced to you some important steps to clean up computer junk. By completing all 10 items, I can guarantee you’ll see an increase in performance.

Of course, there are other ways to improve your computer’s speed — you can upgrade the hardware, for example — but doing so is often expensive and complicated for beginners. The trade-off isn’t always worth it.

RAM is often intentionally limited by manufacturers to processing speed. With a few minutes in the BIOS and a bit of experimentation, you can overclock RAM to run faster than the manufacturer’s specifications.

Things you need to know before overclocking RAM

Overclocking RAM is quite complicated compared to CPU overclocking or GPU, simply increase the clock rate and hope your heatsink can handle the temperature of the system. With RAM, there are many things that need to be tweaked, but it is also much safer because RAM does not generate too much heat.

Every program you use stores activity data into RAM before loading it into the CPU’s cache. In games, improvements in RAM latency can significantly reduce frame load times. This can improve fps and most importantly reduce stutter in CPU-intensive areas where new data needs to be loaded from RAM into cache or VRAM.

RAM speed is usually measured in megahertz (Mhz). The speed of DDR4 RAM is usually 2133 Mhz or 2400 Mhz, although the actual speed is only half as it is Double Data Rate (DDR). On top of that, RAM has a lot of different latency control points and read and write speeds. They are measured in cycles and are often grouped under the abbreviation “CAS Latency (CL)”. For example, a mid-range DDR4 RAM kit might get 3200 Mhz CL16. Improving speed or timing will improve latency.

RAM communicates with the rest of the computer using a system called Serial Presence Detect. Through it, it gives the BIOS the main frequencies and times at which it can operate, known as the JEDEC specification. This is the stock speed and it is included in every DDR4 stick ever produced.

However, Intel found a way to cheat the system. By providing another configuration on JEDEC, called XMP (Extreme Memory Profile), they can run RAM higher than standard speed. If you buy RAM clocked above 2400 Mhz, you can get an XMP profile that you can enable anytime.

Manufacturers do not allow the product to work at 100%. They have to do this to push the price of components higher, so it’s often the case that RAM comes with XMP configurations due to product segmentation. RAM also operates within a certain voltage, usually 1,350 volts for DDR4, but you can adjust the voltage a bit yourself.

But the main problem is that the SPD is not activated all the time. According to a Kingston representative, they “adjust only for the ‘Main’ time (CL, RCD, RP, RAS)” and since the SPD system used to store XMP records has a limited number of entries, the rest It’s up to the motherboard to decide. In my case the “auto” setting on the ASUS motherboard set some strange values ​​some of the time. RAM refuses to run with XMP profile until I fix that time myself.

How to determine response time of RAM

While overclocking RAM is pretty safe, it’s also a bit more complicated than just increasing the values ​​when overclocking the CPU. If you are running AMD Ryzen then overclocking the ram is simpler because there is a tool called “Ryzen DRAM Calculator” will make this whole process easier. The computer will eliminate some headaches and you won’t have to leave the RAM in the “AUTO” setting on the mainboard.

For Intel, the tool can still identify key times, and the built-in memory checker will work in a similar way. You will also download this software even if you are not using AMD.

Open the software and enter the code of the Ryzen CPU you are using (select Ryzen 2 Gen if you are using Intel) and the type of memory you have. If you do not know, you can search google to check the components of RAM.

Press the button “R – XMP” purple at the bottom to load Profile XMP. Enter your Ryzen CPU code and memory type, then press “Calculate SAFE” to calculate the running time of RAM. You can press the button “Compare Timings” to compare with my XMP settings.

The SAFE setting will almost always work, I’ve had no problems at many fixed voltages. The FAST feature will probably work, but may not be stable.

You need to take a screenshot (there is a button on the bottom left) and view it while in the BIOS.

How to Overclock RAM in BIOS

You should have taken a screenshot of the computer with the available parameters because the next steps will be performed in the BIOS.

Turn off the PC and boot into BIOS or UEFI. Continuously press the Del or F2 button (depending on the Main type), access the BIOS similar to this screen:

Find tabs Memory or RAM and download your XMP Profile to get started. Make sure the clock is what you want. You can increase the clock while keeping the response time the same (especially on Intel CPUs).

Now, open the screenshot on your phone and start typing the corresponding number. In your case, the numbers match, but you should still check again.

ASUS BIOS displays the full names of multiple key times, here is a list of key times and their associated terms:

• tCL – Main CAS Latency
• tRCDRD – Read delay from RAS to CAS
• tRCDWR – RAS to CAS write delay.
• tRP – RAS Preload Time (PRE)
• tRAS – RAS Active Time (ACT)

The rest should exactly match the screenshot.

Once you’re done entering the time, look for the voltage control section. You’ll enter the recommended DRAM voltage (the calculator shows potentially unsafe voltages in red. Any voltage below 1,450v is probably safe). If you’re using Ryzen, you’ll enter the recommended SOC voltage, which powers the memory controller on the CPU.

Save the settings and exit the BIOS. Your computer will reboot and if it gets into Windows, you can move on to the next step.

What to do if it won’t boot

If the system fails to boot, your motherboard may not be able to perform a power check (POST) self check, you may have to wait about 30 seconds for the BIOS to boot into safe mode and restore the most recent settings. . You could try increasing the memory voltage to 25 millivolts (0.025v) before the maximum recommended voltage is reached. You can also try increasing the SOC voltage a bit on Ryzen PCs, as 1st and 2nd Gen Ryzens are very difficult to overclock RAM. Intel doesn’t have the same SOC as Ryzen and probably won’t have this problem.

If your computer won’t boot into safe mode, don’t worry. Your BIOS may not have that feature and you will need to clear the CMOS manually. CMOS is the battery on the motherboard that you can remove and re-insert. After re-inserting the CMOS, the PC will return to its normal state.

Guaranteed stable overclock

After returning to Windows, you need to make sure the overclock is stable. Switch to the “MEMbench” tab to check. Set the mode to “Custom” and the task scope to 400%. Click “Max RAM” at the bottom to allocate all your remaining RAM. The software will check and find errors on RAM 4 times.

Click “Run” to start running the RAM test. In my case, testing 32GB of RAM at task scope 400% took less than ten minutes.

If there are no errors, you can overclock the RAM again or check the “FAST” setting. This is the whole overclocking process. If possible, test the RAM overnight, set the task scope to about 100,000% and leave the computer overnight. If there are no errors, then you have successfully overclocked the RAM.

Benchmark RAM

If you want to see how much power RAM has increased, you can download UserBenchmark to benchmark your entire PC, including your RAM. My RAM has increased 23% performance after overclocking.

In a 12-minute video, Microsoft details the tweaks and optimizations that make Windows 11 faster than Windows 10 on all compatible hardware.

Microsoft explains why Windows 11 is faster than Windows 10

Windows 11 focuses on three main areas of productivity, creativity and ease of use, but another aspect that is more noticeable is speed. Through a series of performance and optimization improvements, Windows 11 is expected to be significantly faster than Windows 10, even when running on identical hardware.

The main changes are detailed in a 12-minute YouTube video from the channel Microsoft Mechanics official, with Steve Dispensa as the presenter. There is a paragraph mentioned that is quite technical, but can still be understood by others.

These include improved memory management, which allows Windows 11 to prioritize the most frequently used applications and processes. Even if the CPU is occupied by a heavy task, applications can launch quickly and run in the background without any problem. This also works for specific tabs and windows in Microsoft’s Edge browser.

Better memory management also means Windows 11 devices can wake up from sleep much faster. Microsoft says it has optimized the hardware so that only the components necessary to function are activated. Instant booting from sleep is one of the main strengths of Intel’s Evo platform, but that also relies on the latest Intel chips.

In terms of processing power, Windows 11 will also be said to be more efficient than Windows 10. This is aimed at reducing the burden on the CPU.

Calls will go to specific hardware components, ensuring only the necessary ones are started. At the software level, Windows 11 is supposed to be more efficient with the hardware power it uses – this will reduce the load on the CPU and avoid throttling.

Among other improvements, Windows 11’s reduced disk space means that the operating system will take up significantly less space on the device’s hard drive. This is possible by extending the use of compression technologies and using the default state for non-critical applications. Other than a slightly longer load time, there should be no impact on the app’s functionality.

The new Windows 11 hardware requirements are also specifically mentioned. Dispensa says the decision to only allow the latest Intel or AMD chips affects both the performance and security of Windows 11. These newer CPUs are also said to be more reliable, and will keep performance levels high for a long time. long time.

You can check out the full 12-minute video below.

Maximum performance will likely still depend heavily on your Laptop or PC hardware. However, any device that meets those hardware requirements will get the speed boost on Windows 11.

Alternatively, you can also download Windows 11 here.