Join the channel Telegram belong to Anonyviet 👉 Link 👈

Join the channel Telegram belong to Anonyviet 👉 Link 👈

As you all know, the checkra1n tool was born based on the iPhone’s hardware failure. To use checkra1n you need to have a new MAC computer to jailbreak the iPhone. However, Bootra1n was born to help those who do not have a MAC Jailbreak Iphone with just a USB Boot. This article AnonyViet will guide you to create USB Boot with Bootra1n to Jailbreak Iphone.

How to create USB Boot Bootra1n to Jailbreak Iphone

To create a USB Boot containing Bootra1n, you need

• USB (at least 512MB or larger)
• 64-bit or 32-bit AMD or Intel computer

You do not need to install additional software or OS.

Download bootra1n

Extract the downloaded bootra1n file, you will see an .ISO file.

Create USB Boot with bootra1n

To bootable USB, you need to use Etcher software.

Download Etcher -> select the extracted iso file -> select USB to create boot -> Press the button Flash!

Insert the USB into the computer and restart the machine, while repeatedly pressing the . key

• F8 (for Asus motherboard),
• F12 (Gigabyte main),
• F11 (asrock and MSI)….

When booting, select the USB name (preferably select UEFI)

Enter checkra1n Linux by (note this version does not show graphics, only commands!)

When booting is complete, the mouse pointer blinks, type the following:

[username]: anon (press enter)

Type the password as: voidlinux (note when you type will do not show letters where should remember to click carefully)

If you are logged in, type the command sudo checkra1n

At this time, the checkra1n interface appears, press enter to select the left button, right to customize.

Some common mistakes

Error -77: Erase your Iphone Passcode before Jailbreak. You can reset that code once done.

Error -78: Exit checkra1n and re-enter the correct command: sudo checkra1n

Secure Boot Errors: Disable Secure Boot in BIOS settings

USB error: Try changing the cable and changing from USB 2.0 (black port) to 3.0 (blue port) and vice versa.

ACPI error: On the boot menu, select RAMthen press TAB and add the command acpi=off nomodeset to the prompt.

So you can Jailbreak Iphone with just a bootable USB without a MAC computer. Perhaps this is the simplest way to jailbreak with Checkra1n ever.

When you press the Power button to start the machine, you will see a Windows logo logo appear a few seconds after the Load is complete, it will go to the Desktop.. However, if you are bored with the default Windows logo on the boot screen, you can add your own custom logo to the start screen. In this article, AnonyViet will guide you to change the Windows 10 boot logo to another image as you like.

The implementation is quite easy, you just need to prepare an image to make the boot logo for Windows. Please follow the steps below change boot logo in Windows 10 .

Some notes when changing the Boot Logo:

Before making any changes, make sure you know and follow the list below.

• Important: Windows backup should be backed up to avoid incorrect operations, leading to Windows failure and failure to start.
• Windows will run in UEFI mode.
• If Windows is running on UEFI, make sure the feature is disabled. Secure Boot. When Secure Boot is enabled in UEFI, you cannot change the boot logo.
• Can’t choose gif image (animated image) to make windows boot logo.
• Have the image you want to set as the boot logo. Image can’t be bigger 300px x 300px.
• Should run as Administrator to proceed to change the Windows Boot Logo
• This guide only applies to Windows 10.
• Use page https://www.iloveimg.com/resize-image to resize images online for standard.

Once you’re sure of everything on the list above, stay tuned for the next section.

Instructions to change the Windows Boot Logo

Since Windows does not have the feature to change the Boot Logo, we will use a free and open source third-party tool called HackBGRT.

1. Now, open the extracted folder, click right mouse to file “setup.exe”and select the option” Run as administrator“.

The above action will launch the application’s command line tool. Here, press the . key i.

2. As soon as you press the key, the program’s configuration file will be opened in Notepad. You just turn off Notepad by clicking on the icon ” X” in the upper right corner.

3. When you close Notepad, HackBGRT will open the Paint application with its own default startup logo. Here, click on “Paste“drop-down and select button”Paste from“.

3. Now find the image you want to set as the new Windows boot logo, select it and click the “button”Open“.

Quick tip: Since the Boot Logo does not support transparent images, change the background color of your transparent image to black before adding it to the Paint application.

4. The boot logo will be added to Paint. If necessary, resize the image by clicking the “Resize” button.

5. Once done, select the option “File → Save” to save the file. After saving, close the Paint application.

6. As soon as you close the application, you are done with the installation of HackBGRT. Now press any key to close this window.

7. Now that you boot into Windows, you should see your new custom boot logo instead of the default Windows logo.

Restore Default Windows Boot Logo

If you want to restore the default Windows 10 logo, open the HackBGRT app again.

1. First, open the HackBGRT folder, right click on the “setup.exe” file and select the “Run as administrator” option.

2. Since the application is already installed in your system, you will see additional options.

3. To completely remove HackBGRT and restore the original boot logo, press r. If you want to close the application and restore the original boot logo, press d. In my case I wanted to remove it completely. So I pressed r.

4. As soon as you press the key, HackBGRT will restore the original boot logo.

5. Just reboot the system and you will see the initial Windows boot logo.

It’s simple to change the Windows boot logo or add a custom boot logo. If you are stuck or need some help, comment below, we will assist you.

Windows 11 requires Secure Boot mode and TPM 2.0 when installed. If you use an old computer, or the machine has not turned on TPM mode, it will display the error message “PC can’t run Windows 11” when installing Windows 11. If you are facing the same problem, don’t worry too much. , this is how to fix Windows 11 installation error in Legacy BIOS mode, even if your computer does not support TPM 2.0

How to fix the error that PC can’t run Windows 11 when installing Windows 11

Want to install Windows 11 on old BIOS without Secure Boot and TPM 2.0? This is a 100% effective workaround when installing Windows 11 but getting an error PC can’t run Windows 11.

Basic condition:

• Windows 11 ISO (Download)
• Windows 10 USB created with Media Creation Tool by this guide.
• Computer running Windows 10
• USB 8GB

What is the solution?

Basically, you need to create a bootable Windows 10 USB drive and then replace the install.wim file in the ‘sources’ folder in the Windows 10 USB with the install.wim file from the Windows 11 ISO File.

Then, open the Windows 11 ISO that has been “Mount” and navigate to the ‘ foldersources‘ inside it.

Then find the file install.wim in the folder ‘sources‘ of the Windows 11 ISO file and copy using the keyboard shortcut Ctrl +. Alternatively, you can also right-click the file and select the ‘Copy’ option from the right-click menu.

Now, plug Windows 10 USB created with Media Creation Tool to your computer and open it in File Explorer. Then open the folder “sources” inside the Windows 10 USB drive.

Finally, paste the file install.wim that you copied of the Windows 11 ISO to the ‘Source’ folder of the Windows 10 USB drive. You can also right click on any free space in the folder and select the option ‘Paste‘ from the available options.

Because file install.wim is also available in Windows 10, so when pasting, a dialog box will appear Replace or Skip Files dialog. You click on Replace the file in the destination to paste over.

After the file install.wim copied to the Windows 10 USB drive, restart your computer. Now restart the computer, during Boot press F2 or F9 or F12 to select Boot Menu. Then select Windows 10 USB to install

Note: Don’t worry about booting the Windows 10 USB drive. The installer you are running is Windows 11 because we copied the install.wim file from the Windows 11 ISO to the Windows 10 USB drive.

Once your USB has booted, you will see an option to select and install the version of Windows 11. It will also pass the security checks without having ‘Secure Boot’ or ‘UEFI’ enabled in the BIOS. So you can fix the “PC can’t run Windows 11” error.

Enable Platform Trust Technology (PTT) mode to replace TPM

To replace TPM 2.0 you can go into the BIOS and enable Intel Platform Trust Technology (PTT) it replaces the TPM chip. Depending on whether the Mainboot and CPU support it or not, and how to enter and turn on PTT is different. You can try to turn it on and try to see if you don’t have to buy TPM chips or use Win 11 mods.

Although Microsoft Windows 11 may be the latest and greatest version of Microsoft, but it can still fail to boot. To troubleshoot Windows not starting properly, many users will use Safe Mode, which eliminates the loading of irrelevant applications, systems, and drivers. It is a very easy and effective troubleshooting method.

However, if you have frequent boot failures, then you should add Safe Mode to your list of boot options (boot menu). This will be less annoying than trying to remember to enter Safe Mode every time you restart your PC. Using the Boot Configuration Data (BCD) editor, we can change the default settings to add Safe Mode to the boot menu.

How to add Safe Mode to the Windows 11 Boot Menu

Click the Windows 11 search icon on the taskbar and type cmd in the search box. Select Run As Administrator from the options menu on the right.

From CMD, enter the following command:

bcdedit /enum /v

Copy the identifier number to the clipboard. It is the number in brackets under the Windows Boot Manager heading. This number is unique to your PC.

Next, enter this command:

bcdedit /copy {your identifier number} /d "Windows (Safe Mode)"

You will be notified as below if the copy is successful.

We can add details to our new Safe Mode configuration using the app msconfig. Type msconfig at command prompt and press enter to open.

Click the Boot tab on the msconfig application. As you can see, we have added Safe Mode to the boot menu. Select Make All Boot Settings Permanent to keep the new configuration intact.

From this configuration menu, you can modify the Safe Mode settings to include network drivers, which can be important for your troubleshooting. Select Safe Boot and then select Network.

When you’re done, click the Apply button and then the OK button. The next time you reboot or start up your Windows 11 PC, you’ll be given the choice of default booting or Safe Mode. If you do nothing for 30 seconds, the system will choose default boot.

When you no longer need the Safe Mode option, run the msconfig application again, click the Boot tab, select the Safe Mode item, and then click the Delete button. Apply the changes and click OK to complete the process. Your PC will now revert to the default boot process.

Forgot Windows password is an obsession of many people. Sometimes you even use your Microsoft account to log in to Windows and forget your password. Currently, the NHV-BOOT rescue toolkit can help you break Windows Pass no matter what type of password: Password Local, Password Microsoft…

NHV-Boot is a USB rescue tool that is integrated into the ISO file. You just need to use the software to extract the ISO file to the USB to create a versatile USB such as: install windows, restore data, reset windows pass … This toolkit is integrated by the author with Intel Gen11 Driver to help you install Windows to the latest version of Motherboard.

Instructions to break Windows Pass to 100% with NHV Boot

To break Windows 10 pass, first you need to create USB with NHV Boot. AnonyViet has a detailed tutorial article how to create USB Boot NHVyou follow each step is 100% success.

After creating the USB NHV Boot, you just need to boot into Win10PE 1709 X64 or Win10PE 20H2 X64 located in the Boot Menu of the USB to continue the next step is to break the windows pass or remove the microsoft account and Windows domain.

Boot into Win10PE 1709 X64 or Win10PE 20H2 X64 is successful, then you open “Pstart Menu Apps” and continue to open the “Reset Win Password” software located in the right menu.

After the software opens, you will see the interface of the software Reset Win Password includes the features I have noted in the image below. Whatever you want to do, just select that feature. Because in this post, I will guide you to break Windows password, so I will choose the feature reset windows pass Or you can also choose the feature to remove your Microsoft account.

Next, you press next.

You choose to continue No.

Continue to choose No one more time.

In this step, you choose the account that you want to break the password. If you do not know which account, you can see the Microsoft account email of that user. After selecting, press next.

Select RESET/CHANGE to break the win pass.

The program will ask if you want to save the file containing the old password to restore? This depends on your needs. If you do not need to recover the old password, you can now reboot into Windows. Because I will guide you through the steps to recover the old password, I will choose YES.

Choose where to save the old password recovery file .PUC.

If you want to recover the old password so that it will not be suspected, then boot back into the USB and open the Reset Win Pass software. In Recovery mode, select SAM – work with regular user accounts. In the What do you want to do section, select Restore previously modified password or data.

Next select the .PUC file where you saved it.

Select as shown below.

Finally, you choose RESTORE and restart the machine. The computer has already restored the old password.

So you can break the windows password and restore it without anyone knowing. Do not use this feature for malicious purposes. If you forget your Windows login password, using NHV-Boot to break the password is the most effective.